- 33 -
Control Panel Installation
3008 and 3009 Control Panel cable can be assembled as a surface mount or behind wall.
Surface mount, cable visible
Cable hidden behind the wall
1) Install the mounting plate and mark places for the
screws. Pre-drill 3*1 mm holes for screws.
2) Cut the cable opening in bottom of the panel.
3) Install the mounting plate.
4) Slide the panel in place from the top down.
5) Remove the display protection tape.
1) Install the mounting plate and mark places for the
screws. Pre-drill 3*1 mm holes for screws.
2) Drill 12 mm hole for the cable. Draw and check hole
location before drilling, it should not be visible when
panel is mounted.
3) Install the mounting plate.
4) Slide the panel in place top-down.
5) Remove the display protection tape.
Cable connection
Please note that cable connector release pin is positioned as in the picture,
when connecting cable into panel. (Soft "click" sound can be heard when
cable is connected.)
Cable release
Press connector release clip (shown in the picture) before pulling the cable
out.
Содержание Spartan
