wallas Spartan, Инструкция по установке, эксплуатации и обслуживанию

Страница: 41 / 109

- 39 -
Use Arrow Buttons to
move the orange selection
square to Settings from the
main menu bar. Use
the
Arrow Buttons (left or
right) to move the orange
selections square to text
Summertime. Press the
Select button .
Use Arrow Buttons
to select On or Off. Confirm
the selection with the
Select
button.
Temp Sensor
- Choose the desired sensor
to measure the indoor
temperature with.
- Wireless sensors are listed
by sensor numbers
- When a wireless sensor is
selected, it gets a running
number ID
-Wireless sensor is used for
displaying the room
temperature
Device Info
- Control panel and heater
software versions (needed
for customer service/tech
help)
- Heater unit serial number
(needed for customer
service/tech help)
Device Stats
- Check there is enough
voltage to start the unit
(must have at least 10 V)
- Check usage hours (units
must be serviced every 2000
hours/3 years)
- System starts
- Pump cycles since new
- Previous error code
If a Lock Icon is displayed,
the heater has locked itself
for safety. The heater will
also lock after 3
unsuccessful starts. Move
the selection square to the
Exclamation Point Icon
and press the Select
Button . An error Page will
appear.
If the heater has locked
itself, there may have been
a failure that should be
investigated and resolved
prior to futher use. The
error page will display a
check list and a website for
further information.
If you need help, reach out
to a professional. To remove the lock, move
the selection square to the
Main Menu Bar and press
the Select Button , choose
Settings , and press the
Select Button . Choose
Clear Lock from the
Settings Menu and press
the
Select Button .