Wallace Perimeter Security SPEEDGATE, Руководство по установке и обслуживанию

Страница: 50 / 142

50
wallaceperimetersecurity.com
Phone: 866.300.1110
SPEEDGATE INSTALLATION
2. Place columns using leveling nuts/washers, maintaining base flange plate as close to the pile surface
as possible. Refer to diagram steps 12 to 15 above.
Columns are left/right side specific. Take note of the photo eye plate and hinge
mounting hole locations. Photo eye location cut-out should face toward the gate
opening; the hinges (see Figure 10) should face toward the Secure Side (this will allow
for the gate to swing into the property when opening). If you require the gate to open
AWAY from the Secure Side, reverse the location of the hinge mounting holes. As per
UL 325 a SpeedGate opening toward the Public Side must have the panels remain
over the owner’s property and not move out onto a public sidewalk or street.
Figure 10. Photo Eye Plate and Hinge Mounting Locations