Wallace Perimeter Security SPEEDGATE, Руководство по установке и обслуживанию

Страница: 8 / 142

8
wallaceperimetersecurity.com
Phone: 866.300.1110
INSTALLATION AND COMMISSIONING CHECKLIST
Installation and Commissioning Checklist
Complete Step Description Manual
Section
Reference(s)
1. Pallet shipped to site from Wallace Perimeter Security (WPS). page 44
2. Install gate onto concrete anchors; ensure all components level.
(Swing toward property side recommended.)
page 45
3. Mount operator cabinet. page 54
4. Complete electrical connections: page 57
4.1 Conduit between primary and secondary columns: page 59
page 61
page 63
page 68
4.1.1 Low voltage wiring to post termination box, excluding the
encoder and motor cables.
as above
4.2
Between the SpeedGate and the operator cabinet:
as above
4.2.1 Motor cables to be kept a minimum of 18 inches from the
secondary (control) wiring.
as above
4.2.2 Multi-conductor low voltage cable. as above
4.2.3 Encoder cables. as above
4.3
Between the vehicle loops and the operator cabinet:
as above
4.3.1 Vehicle detector loops leads. as above
4.4
From operator cabinet to building:
as above
4.4.1 Power supply (2 hots, 1 ground @ 208-240V single phase). as above
4.4.2 Control wiring. as above; also
page 86 to
page 99
5. Commissioning, following mechanical and electrical portions of
the SpeedGate installation: