WAGO 852-1305 Скачать руководство пользователя страница 94

Страница: 94 / 314

Enhanced Features

WAGO-ETHERNET-Zubehör 852

852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX

Manual

1.1.0

MSTP

The MSTP (“

ultiple

panning

ree

rotocol”) is an RSTP extension. It allows

different spanning tree instances in conjunction with VLANs (“Virtual Local Area

Networks”).

For a VLAN or group of VLANs, STP instances can be created independently that

user their own different spanning trees within a LAN.

With the MSTP approach, a root bridge and the lowest path costs between the root

bridge and the root ports offered of the individual bridges are determined. The

root bridge sends Bridge Protocol Data Units (BPDU) to all bridges and

determines the network configuration from the configuration data contained in the

BPDU data packets.

7.2.14 Xpress Ring

The Xpress Ring is a fast-acting, self-healing ring recovery technology that

enables networks to recover from link failure within 50 ms.

Fast Link Recovery and Ring Redundancy are important functions for increasing

the reliability of non-stop systems.

A well-planned network with an Arbiter switch and ring ports can recover from

segment failure within a very short time.

A switch in the Xpress Ring has only two roles: either “Forwarder” or “Arbiter”.

There can be only one Arbiter switch while all other switches are “Forwarders”.

One of the ring ports of an Arbiter switch is set to the blocking state. If one of the

ring connections fails, the blocked port is set to the forwarding state.

Содержание 852-1305



























































































































































































































































































































Результаты поиска

Содержание 852-1305

Отзывы:

Бренды по названию

Популярные бренды

WAGO 852-1305, Руководство пользователя

Результаты поиска

Содержание 852-1305

Отзывы:

Бренды по названию

Популярные бренды