WAGO 852-1305 Скачать руководство пользователя страница 101

Страница: 101 / 314

WAGO-ETHERNET-Zubehör 852

Enhanced Features 101

852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX

Manual

1.1.0

7.3.2

Access Control List (ACL)

The ACL (“

ccess

ontrol

ist”) is a list of permissions attached to an object.

The list specifies who or what is allowed to access an object and what operations

are allowed to be performed on the object.

The ACL function allows users to configure some rules to reject packets received

from specific ingress ports or all ports. These rules check the source and

destination MAC addresses of packets. If packets match these rules, the system

does not deny the action, i.e., the packets are not rejected.

The “Action Resolution Engine” collects the information (action and metering

results) from the hit entries: if more than one rule matches, the actions and

meter/counters are taken from the policy associated with the matched rule with

highest priority.

Содержание 852-1305



























































































































































































































































































































Результаты поиска

Содержание 852-1305

Отзывы:

Бренды по названию

Популярные бренды

WAGO 852-1305, Руководство пользователя

Результаты поиска

Содержание 852-1305

Отзывы:

Бренды по названию

Популярные бренды