manualshive.com logo in svg

WAGO 2857-570/024-001, Руководство пользователя, Страница: 83 / 120

Поделиться
Скачать
WAGO 2857-570/024-001 Скачать руководство пользователя страница 83

2857-570/024-001

Configuration with the Interface Configuration Software

Product manual | Version: 2.0.0

83

3-Phase Power Measurement Module, 1 A

Table 80: Dialog settings – Device settings

Setting options

Description

General

Topology

The topology can be selected here. The options are as
follows:

• 4-wire three-phase network

• 3-wire three-phase network (ARON)

• 3-wire three-phase network

• 2-wire network

Voltage transformer (VT) (primary voltage/ secondary
voltage)

The relationship betw een primary and secondary volt-
age can be set here.

Peak value measurement

The line conductor for which the peak value should be
measured can be selected here. The options are as
follows:

• L1

• L2

• L3

Min./max. values

[Delete]

A minimum or maximum value that should be deleted
can be selected here. It is also possible to delete all
measured values.

Deletes the selection.

Digital output

Switching behavior

The digital output switching behavior can be selected
here. The options are as follows:

• inactive

• S0 interface

• U

S

 switching

• GND switching

Energy meter

Active Power

Corresponding threshold values for active power, ap-
parent power and reactive pow er can be selected
here. Systemic leakage currents are not included in
the energy measurement. The energy measurement is
interrupted as soon as there is an underrun of one of
the set values.

Reactive Power

Apparent Power

Tab 

Phase Lx

On this tab, the user scaling for phases L1 … L3 can be parameterized.

Содержание 2857-570/024-001

























































































































Отзывы:

Нет отзывов