WAGO 2857-570/024-001 Скачать руководство пользователя страница 113

Страница: 113 / 120

2857-570/024-001

Appendix

Product manual | Version: 2.0.0

113

3-Phase Power Measurement Module, 1 A

DC Power Supply

787-2850

Operating tool, type 2

210-720

T-wrench
(for Art.-Nr. 855-8015)

855-8000

MicroSD memory card, 2 GB

758-879/000-3102

13.5 Protected Rights

• Adobe

and Acrobat

are registered trademarks of Adobe Systems Inc.

• Android

is a trademark of Google LLC.

• Apple, the Apple logo, iPhone, iPad and iPod touch are registered trademarks of Apple

Inc. registered in the USA and other countries. “App Store” is a service mark of Apple
Inc.

• AS-Interface

is a registered trademark of the AS-International Association e.V.

• BACnet

is a registered trademark of the American Society of Heating, Refrigerating

and Air Conditioning Engineers, Inc. (ASHRAE).

•

Bluetooth

is a registered trademark of Bluetooth SIG, Inc.

• CiA

and CANopen

are registered trademarks of CAN in AUTOMATION – Interna-

tional Users and Manufacturers Group e.V.

• CODESYS is a registered trademark of CODESYS Development GmbH.
• DALI is a registered trademark of the Digital Illumination Interface Alliance (DiiA).
• Docker and the Docker logo are trademarks or registered trademarks of Docker, Inc. in

the United States and/or other countries. Docker, Inc. and other parties may also have
trademark rights in other terms used herein.

• EtherCAT

is a registered trademark and patented technology licensed by Beckhoff

Automation GmbH, Germany.

• ETHERNET/IP™ is a registered trademark of the Open DeviceNet Vendor Association,

Inc (ODVA).

• EnOcean

is a registered trademark of EnOcean GmbH.

• Google Play

is a registered trademark of Google Inc.

• IO-Link is a registered trademark of PROFIBUS Nutzerorganisation e.V.
• KNX

is a registered trademark of the KNX Association cvba.

• Linux

is a registered trademark of Linus Torvalds.

• LON

is a registered trademark of the Echelon Corporation.

• Modbus

is a registered trademark of Schneider Electric, licensed for Modbus Organi-

zation, Inc.

• OPC UA is a registered trademark of the OPC Foundation.
• PROFIBUS

is a registered trademark of the PROFIBUS Nutzerorganisation e.V.

(PNO).

• PROFINET

is a registered trademark of the PROFIBUS Nutzerorganisation e.V.

(PNO).

• QR Code is a registered trademark of DENSO WAVE INCORPORATED.
• Subversion

is a trademark of the Apache Software Foundation.

• Windows

is a registered trademark of Microsoft Corporation.

Содержание 2857-570/024-001

























































































































Результаты поиска

Содержание 2857-570/024-001

Отзывы:

WAGO 2857-570/024-001, Руководство пользователя, Страница: 113 / 120

Результаты поиска

Содержание 2857-570/024-001

Отзывы: