WAGNER TITANUS SUPER-SENS, Техническое руководство

Страница: 32 / 177

Technical Description TITANUS SUPER·SENS
®
2 – 12
Data: 02/09 TSS_02_A-en-e
State and
fault information TITANUS
®
passes the following state information and fault information to
the diagnostic device:
Main Window Current State Measure/Help Text
pipe fracture air flow value has ex-
ceeded the set threshold
check for pipe fracture, if
necessary eliminate the
pipe fracture
pipe blockage air flow value remains un-
der the set threshold or
the air filter is blocked or
the ventilator fan fails
eliminate the blockage
(blowing out), exchange
the air filter, send the de-
vice to the fabricant
fault air flow sensor air flow too high or air flow
sensor damaged
use the test pipe
check the project planning
or the tightness
effect the air flow-init
fault detector detector head not installed
or connection cable to
base board damaged,
head control-init fails
mount the detector head,
effect the init, check the
connection cable to the
base board
fault smoke level light power too small exchange the detector
head
fault temperature sensor temperature sensor dam-
aged
exchange the base board
fault air pressure value fault air pressure signal check the voltage at
MP1/MP2 according to air
pressure adjustment
chart, if not exchange the
base board
pre-warning drift half of the drift threshold
has been reached
exchange the detector
head
fault drift the drift threshold has
been exceeded
exchange the detector
head
sensitivity switched input "alt Sense" active the detector head has
switched to the next less
sensitive level
power supply fault ventilator fan and parts of
the electronic system are
current less; switch con-
troller on base board
damaged
verify external voltage
supply
exchange the base board
watchdog activated This control unit can be
activated in case of short
EMC-faults.
If the watchdog is acti-
vated too often, exchange
the base board (Notice:
Information is only dis-
played as stored mes-
sage!)
www.acornfiresecurity.com
www.acornfiresecurity.com