WAGNER TITANUS SUPER-SENS, Техническое руководство

Страница: 52 / 177

Pipe Design TITANUS SUPER·SENS
®
4 – 4
Data: 02/09 TSS_04_A-en-e
Longer pipe
intake lines Pipes with a diameter of 32mm or 40mm may be used for long pipe in-
take lines in accordance with the chapter "Special project planning".
This reduces the air resistance of the pipe intake line or makes it possible
to achieve a greater equilibrium for sampling via outgoing transmission
lines.
Branch length In order to ensure a short transport time for the smoke fumes in the sam-
pling pipe and thus enable rapid detection, it is better to plan several
shorter than a few long ones (preferably a U- or double U-pipe system ).
Pipe designs 4 types of pipe designs can be selected, depending on the cabinet ge-
ometry (see Figure 4.2).
I- pipe An air sampling smoke detection pipe system
without branches.
U- pipe An air sampling smoke detection pipe system
which branches into 2 air sampling branches after
the connection to the TITANUS
®
.
M-pipe An air sampling smoke detection pipe system
which branches into 3 air sampling branches after
the connection to the TITANUS
®
.
Double U-pipe An air sampling smoke detection pipe system
which branches into 4 air sampling branches after
the connection to the TITANUS
®
.
www.acornfiresecurity.com
www.acornfiresecurity.com