WAGNER TITANUS SUPER-SENS, Техническое руководство

Страница: 96 / 177

Installation TITANUS SUPER·SENS
®
5 – 4
Data: 02/09 TSS_05_A-en-e
5.3.1.2 Activating Threshold of the Air Flow Monitoring
Set the activating threshold of the air flow fault via the switch S2 (C, D)
on the base board (refer to
2H
Fig. 5.2) of TITANUS
®
.
Level
Activating Thresholds Switch S2
Contact C (3) Switch S2
Contact D (4)
I small on off
II medium off on
III large (standard) off off
IV very large on on
Choose the activating threshold acc. to chapter 4, "Project Planning".
5.3.1.3 Delay Period of the Alarm Activation
The delay period for the alarm thresholds can be set via the switch S2 (E,
F). As a standard the delay period for alert, action and fire alarm is set to
10 s. If the smoke level increases during operation so that one of the
alarm thresholds is reached the delay period starts. After the delay period
has been expired the signal is transmitted if the alarm remains activated.
Thus, a false alarm can be avoided in case of short interferences (dust).
Alarm
Delay Period Switch S2
Contact E (5) Switch S2
Contact F (6)
0 seconds off off
10 seconds (standard) on off
30 seconds off on
60 seconds on on
For TITANUS
®
with a sensitivity level IV an alarm delay period of 30 s is
recommended.
TIP
www.acornfiresecurity.com
www.acornfiresecurity.com