Wacker Neuson DPU 4545 Скачать руководство пользователя

Страница: 53 / 92

9 Maintenance

100_0202_mt_0008.fm

Note:

Before installing the battery cover, ensure that the positive terminal cover
is attached. Make sure that the degassing tube is free of kinks.
When attaching the battery cover, pay attention to the coiled helix cable.

6. Replace battery cover.

Changing the starter battery

Note:

Only Wacker Neuson use starter batteries.
Only replace defective starter batteries with Wacker Neuson starter bat-
teries. See

Technical Data

section.

Only the Wacker Neuson starter battery is vibration proof and therefore
suitable for the high vibration exposure.

1. Remove battery cover.

Note:

First disconnect negative terminal, then positive terminal.

2. Disconnect starter battery and remove degassing tube.

3. Lift out defective starter battery and remove battery protectors.

4. Attach battery protectors to the new starter battery.

DANGER

Electric shock
Risk of injury by simultaneously touching the positive terminal and ground.



Always disconnect the negative terminal first.



Always connected the positive terminal first.

Pos.

Designation

Pos.

Designation

Battery cover

Starter battery

Содержание DPU 4545





























































































Результаты поиска

Содержание DPU 4545

Отзывы:

Похожие инструкции для DPU 4545

Бренды по названию

Популярные бренды

Wacker Neuson DPU 4545, Руководство оператора

Результаты поиска

Содержание DPU 4545

Отзывы:

Похожие инструкции для DPU 4545

Бренды по названию

Популярные бренды