8 Use and operation
100_0202_op_0009.fm
39
5. Grasp handle grip with one hand, with the other hand support the protective
cage.
Note:
After engagement of the automatic decompression five turns of the start-
ing crank are required until the engine can compress again and ignite.
6. Turn the handle slowly anticlockwise, until the jack engages. Then rotate
powerfully with increasing speed.
Note:
Once the engine starts, the decompression lever unlatches (maximum
speed must be reached), the engine starts and the vibration begins.
The firm connection between the engine and the starting crank must be
guaranteed by holding the crank handle without twisting and fast turning
and must not be interrupted during the boot process under any circum-
stances.
If during the start-up process a setback occurs due to weak cranking, us-
ing the handle grip, the crank web / starting crank connection is disen-
gaged with a short reverse rotation.
With repeated start-up attempts, wait for the engine to stop. Do not acti-
vate the decompression lever while the engine is running.
7. Pull out the starting crank from the support.
8. Set the throttle control lever to idle position, engage.
9. Hang the starting crank in the provided bracket.
10. Let the machine warm up for several minutes idle.
