8 Use and operation
100_0202_op_0009.fm
43
8.4
Operation
The intended operator space is behind the machine.
Hold and steer the machine using the control handle.
8.4.1
Choose travel direction
1. Set the throttle control lever to full throttle position.
2. Select travel direction and speed with the control handle.
8.4.2
Compatec - Read compaction display
This display is a rough guide to the progress of work during compaction.
Note:
To protect the machine, the display unit warns the operator in case of
over-compaction by rapid flashing of all LEDs. The brightness of the LEDs
adjusts automatically to the lighting conditions of the work area.
The number of LEDs lit is proportional to the density of soil, more lit LEDs
means more soil density.
Note:
The discovery of flaws (non compactable material) is possible if the flaw
is longer than a meter.
With sudden changes from high to low compacted soil (or vice versa),
there is a slow rise or fall in the LEDs.
8.5
Turning off
Note:
The machine does not take the decompression lever out of operation, as
this may lead to damage to the machine or engine.
Pos.
Designation
Pos.
Designation
1
forwards
2
backwards
1
2