3 Security
100_0202_si_0006.fm
19
3.9
General safety instructions - fuel, lubricants or coolants
The following instructions must be adhered to:
Always wear safety glasses and protective gloves when handling fuel, lubri-
cants, and coolants. If hydraulic oil, fuel, oil, or coolant gets into your eyes,
see a doctor immediately.
Avoid direct skin contact with fuel, lubricants or coolants. Rinse skin immedi-
ately with soap and water.
Do not eat or drink while working with fuel, lubricants or coolants.
Hydraulic oil or fuel contaminated by dirt or water can cause premature wear
or failure of the machine.
Dispose of discharged or spilled supplies according to applicable regulations
for environmental protection.
If fuel, lubricants or coolants emerge from the machine, cease operation of
the machine and immediately have it repaired by the Wacker Neuson contact
partner.
3.10
General safety instructions - Starter batteries
The following instructions must be adhered to:
When disconnecting the starter battery, always disconnect the negative ter-
minal first!
When connecting the starter battery, always connect the positive terminal
first! Fasten battery terminal cover!
Flames, sparks, and smoking are prohibited when handling starter batteries.
Starter batteries contain corrosive acid. Wear acid-proof protective gloves
and safety glasses when handling starter batteries.
Prevent incorrect connection of the starter battery or bridging of the terminals
with tools. Risk of short circuit!
