Wacker Neuson DPU 4545 Скачать руководство пользователя

Страница: 32 / 92

7 Transport

100_0202_tr_0006.fm

Transport

WARNING

Improper handling may result in injury or serious material damage.



Read and follow all safety instructions in this operator's manual.

DANGER

Danger of falling.
A falling machine can cause serious injury, e.g. by crushing.



Only use suitable and tested hoisting gear and lifting tackle (safety load
hooks) with sufficient capacity.



Only lift the machine at the central lifting point.



Safely secure the machine to the hoist.



Do not lift the machine with excavator bucket or forklift at the central lifting
point.



Do not lift the machine at the control handle.



Evacuate danger area when lifting, do not stand under suspended loads.

WARNING

Fire and explosion hazard due to fuel.
Spilled fuel can ignite and cause serious burns.



Lift and transport the machine upright.

CAUTION

If the central lifting point of the machine is mounted offset, the machine is no
longer in balance and can tip backwards.

Содержание DPU 4545





























































































Результаты поиска

Содержание DPU 4545

Отзывы:

Похожие инструкции для DPU 4545

Бренды по названию

Популярные бренды

Wacker Neuson DPU 4545, Руководство оператора

Результаты поиска

Содержание DPU 4545

Отзывы:

Похожие инструкции для DPU 4545

Бренды по названию

Популярные бренды