Wacker Neuson DPU 4545 Скачать руководство пользователя

Страница: 59 / 92

12 Accessories

100_0202_ac_0004.fm

12 Accessories

A wide range of accessories is available for the machine.

For more information on the individual accessories see

www.wackerneuson.com.

Extension plates

Extension plates are available for the machine in different widths, which can in-
crease or reduce the width of the machine.

Sliding

Sliders provide maximum protection against damage to the paving stone sur-
face, which is required especially in surface-coated paving locations.

Starting crank

DPU 4545 and DPU 5545 - short tool shank of the starting crank.

DPU 6555 - long tool shank of the starting crank.

Starting crank bracket

To hold the starting crank on the machine, a starting crank bracket can be mount-
ed.

Chassis

A chassis is offered for easier transport to the construction site.

CAUTION

Accessories and spare parts not from Wacker Neuson may increase the risk of
injury and possible damage to the machine.



By using other accessories and spare parts not from Wacker Neuson all lia-
bility is eliminated.

Содержание DPU 4545





























































































Результаты поиска

Содержание DPU 4545

Отзывы:

Похожие инструкции для DPU 4545

Бренды по названию

Популярные бренды

Wacker Neuson DPU 4545, Руководство оператора

Результаты поиска

Содержание DPU 4545

Отзывы:

Похожие инструкции для DPU 4545

Бренды по названию

Популярные бренды