Wacker Neuson DPU 4545 страница 45 Скачать руководство пользователя

Страница: 45 / 92

9 Maintenance

100_0202_mt_0008.fm

Maintenance

WARNING

Improper handling may result in injury or serious material damage.



Read and follow all safety instructions in this manual.

WARNING

Danger of poisoning by exhaust fumes.
Exhaust fumes contain poisonous carbon monoxide, which may lead to uncon-
sciousness or death.



Only perform maintenance work when the engine is switched off and the
machine is idle.

WARNING

Risk of injury from the machine starting in an uncontrolled manner and moving
parts.



Only perform maintenance work when the engine is switched off and the
machine is idle.

WARNING

Fire and explosion hazard due to fuel and fuel vapors
Fuel and fuel vapors can ignite or catch fire and cause serious burns.



No smoking.



Do not refuel near an open flame.



Before refueling, switch off engine and allow to cool.

WARNING

Hot surface warning
Exhaust muffler and engine can become very hot, which can cause severe
burns upon contact with the skin after a very short time.



Always allow machine to cool after use.



If the cooling period cannot be adhered to (e.g. due to an emergency), use
heat-resistant protective gloves.

Содержание DPU 4545





























































































Результаты поиска

Содержание DPU 4545

Отзывы:

Похожие инструкции для DPU 4545

Бренды по названию

Популярные бренды

Wacker Neuson DPU 4545, Руководство оператора

Результаты поиска

Содержание DPU 4545

Отзывы:

Похожие инструкции для DPU 4545

Бренды по названию

Популярные бренды