Wacker Neuson DPU 4545 Скачать руководство пользователя

Страница: 24 / 92

4 Safety and information labels

100_0202_ls_0006.fm

Safety and information labels

The following stickers are found on the machine:

WARNING

Illegible symbols
Over time, stickers and signs on the machine can get dirty or otherwise become
illegible.



Keep all safety, warning, and operating instructions on the machine in good
readable condition.



Replace damaged stickers and signs immediately.

Pos.

Label

Description

Use personal protection equipment in or-
der to avoid injuries and health hazards:



Ear protection.



Read operator's manual.

A falling machine can cause serious inju-
ry.



Only lift the machine at the central lift-
ing point with certified hoist and lifting
tackle (safety load hook).



Do not lift the machine with excavator
bucket at the central lifting point.



Do not lift the machine with forklift at
the central lifting point.

0219175

0216633

Содержание DPU 4545





























































































Результаты поиска

Содержание DPU 4545

Отзывы:

Похожие инструкции для DPU 4545

Бренды по названию

Популярные бренды

Wacker Neuson DPU 4545, Руководство оператора

Результаты поиска

Содержание DPU 4545

Отзывы:

Похожие инструкции для DPU 4545

Бренды по названию

Популярные бренды