W6 N 707D free-arm Скачать руководство пользователя страница 35

Страница: 35 / 91

Manual • Cover W6 N 707D Free Arm • 29/10/2019 • 1.0 • GBR

Inserting a needle

Changing needles

Place a small piece of thick fabric under the presser foot.

This will keep the needle from falling into the needle plate.

Lower the needle by means of the handle wheel until it just goes into the

fabric.

Loosen the needle clamp screw by means of the Allen key.

Make sure to only loosen the screw and not to remove it.

Hold the needle securely with your fingers and turn the

‹hand wheel›

forwards towards you until the needle bar is in the highest position.

The needle bar goes back up, while the needle remains stuck in the

fabric.

» The needle has been removed

W6 tip

If you remove only one needle, you should definitely tighten the needle

clamp screw gently so that it will not get lost.

ATTENTION:

If the needles have been inserted correctly, the needles on the right seem to

be a little longer than the needle on the left. The needle heights drop from

left to right.

7.3 Inserting a needle

Make sure to select a suitable needle. Only use W6 WERTARBEIT needles

ELX705 of size 80 or 90 for this cover.

W6 tip

The cover sews with up to three needles. One for the orange, one for the

blue and one for the green thread. As the insertion process of the needles

is identical, the procedure used for only one needle is described here.

Prerequisite:

•

The new W6 WERTARBEIT needle ELX705 of size 80 or 90 is ready

for use.

Содержание N 707D free-arm




























































































Результаты поиска

Содержание N 707D free-arm

Отзывы:

Похожие инструкции для N 707D free-arm

Бренды по названию

Популярные бренды

W6 N 707D free-arm, Руководство пользователя

Результаты поиска

Содержание N 707D free-arm

Отзывы:

Похожие инструкции для N 707D free-arm

Бренды по названию

Популярные бренды