W6 N 707D free-arm, Руководство пользователя

Страница: 59 / 91

Manual • Cover W6 N 707D Free Arm • 29/10/2019 • 1.0 • GBR
4. ORANGE thread guide path (threading needle thread C)
Threading
Prerequisite:
• The brown thread of the lower looper has been threaded.
• The front cover is closed.
• The cover is switched off.
• The plug has been disconnected from the mains.
• The cover is loaded with four spools.
• The telescopic arm is fully extended.
• The presser foot is in the upper position (only then can the tension
discs be disengaged).
Please proceed as follows:
1.
At threading position 1, pull the orange thread from behind through the
hole of the large oval metal bend of the thread guide of the telescopic
arm.
2a.
At threading position 2a, pull the orange thread under tension with
both hands laterally from left to right below the long small pre-
tension metal arm hook. When the orange thread engages into
pre-tension 2a, you will hear it click into place.
Attention: A pre-tension can only be built up if you hear an
engagement sound. Failure to observe will result in an incorrect
seam pattern.
Picture detail for point 2
2b.
Keep holding the orange thread taut and pull it from right to left
under the small round metal plate on the right side.
5