Vulcan-Hart VFBMW, Руководство по обслуживанию

Страница: 20 / 52

FLASHBAKE
®
/ MICROWAVE OVEN REMOVAL AND REPLACEMENT OF PARTS
Form 24694 (April 2001) Page 20 of 52
Left Duct
NOTE: Anytime left duct is removed or lifted, clean
perforated area underneath duct.
1. Remove four screws securing left side of duct.
2. Remove two screws securing duct to top of
lamp housing.
3. Carefully work duct up and out enough to
remove thermal disk from duct and work wires
out of the wire retainers.
4. Reverse procedure to install.
CAVITY THERMISTOR
WARNING: DISCONNECT THE ELECTRICAL
POWER TO THE MACHINE AT THE MAIN
CIRCUIT BOX. PLACE A TAG ON THE CIRCUIT
BOX INDICATING THE CIRCUIT IS BEING
SERVICED.
1. Remove "UPPER LAMP HOUSING AND
DUCT ASSEMBLY.”
2. Remove two screws securing mounting
bracket.
NOTE: Wires may be inside cable wrap.
3. Disconnect thermistor plug from control board.
4. Reverse procedure to install.
HIGH VOLTAGE TRANSFORMER
WARNING: DISCONNECT THE ELECTRICAL
POWER TO THE MACHINE AT THE MAIN
CIRCUIT BOX. PLACE A TAG ON THE CIRCUIT
BOX INDICATING THE CIRCUIT IS BEING
SERVICED.
1. Remove "UPPER LAMP HOUSING AND
DUCT ASSEMBLY.”
2. Remove "MAGNETRON.”
3. Disconnect primary winding connectors.