67
5. VPON Network Operation
5.1 Introduction
VP-404/4048 can also be configured over a network using a PC running a standard web browser. This
chapter covers network operation.
5.2 Connecting
The VP-404/4048 GUI can be viewed from a standard internet browser when the device is connected on
the same network as your PC or if it is connected through a cable or xDSL modem to the Internet. Refer
to the hardware manual for more information about making connections using the RJ-45 Ethernet (LAN)
port. Make sure that the VP-404/4048 is configured for
Network
running mode.
To access the VP-404/4048 from remote browser:
1. Open a browser window on a terminal that has network access to the VP-404/4048.
2. Type the IP address of the VP-404/4048 in the browser address bar.
The first time you attempt to view the VP-404/4048 user interface using a web browser, an ActiveX
installation procedure will begin automatically. When the following window appears, click on the
Download LVSETUP.EXE
link. The download will begin and the following window will appear.
Click
Open
to download and install the new plug-in. The download status is displayed and you are
prompted for an installation location.
Click
OK
to complete the installation. The following message will appear.
Default User Name: webmonitor
Default Password: oyo
