61
2. Press the
OK
button to display the Pre-Alarm menu.
3. Use the
Up
and
Down
arrow buttons to select the camera to change from the list.
4. Press the
Right
arrow button to confirm.
5. Use the number buttons on the remote control to enter a new value.
6. Press the
OK
button when the value is set correctly.
4.5 Playback
Use the
Playback
function to display a list of all recordings stored on the VP-404/4048. Use the
Up
and
Down
arrow buttons to select a recording to play back and press the
OK
button to confirm. The chosen
track is played. Use the
Prev Page
and
Next Page
buttons on the remote control to move
between pages.
4.5.1 Playback list
Use the
Playback list
function to display a list of all recordings stored on the VP-404/4048 as follows.
1. Use
the
Up
and
Down
arrow buttons to select a recording to play back. The alarm condition which
caused the file to be recorded is indicated in the list. For instance, in the screen shot shown here, the letter
M
next to a file indicates that the file was recorded after motion was detected by the camera. “
A”
indicates that the file was recorded after a GPIO event. An asterisk (*) before the date indicates that the
file is locked.
2. Press
the
OK
button to confirm. The chosen recording is played back.
2. Press
the
Display
button on the remote control to display various properties of the recorded file. The
date and time of recording are displayed in the upper right corner.
Progress
- A one hour time line is displayed at the bottom of the screen with the moving orange line
indicating the status of playback.
Recorded Data -
The aqua colored portion is where there is recorded data in that hour . A full blue line
means that the whole hour interval was recorded.
