56
4. Use
the
Arrow
buttons to select letters and numbers from the on-screen keyboard and use the
OK
button to confirm.
5.
When the field is correct, press the
Key Pad
button to turn off the on-screen keyboard.
6. Press
the
OK
button to confirm the new field.
4.3.16 Running
mode
Use the
Running Mode
menu to switch between Network Mode and ISP Mode, and between Mouse
Mode and IR Remote Control Mode.
4.3.17 Algorithm
You can change the compression algorithm used by the VP-404/4048 to record video. The VP-404/4048
supports JPEG, MJPEG, and H.263 ,MPEG4 algorithms for compression. For the JPEG and MJPEG
algorithms, the video quality is better but the data rate is also high. The H.263 and MPEG4 algorithm
provides a good video quality with low data rate .
To set up the algorithm:
1. Use
the
Up
and
Down
arrow buttons to select a field to change from the
Algorithm
menu.
2. Use
the
Right
and
Left
arrow buttons to toggle the available options.
3. Press
the
OK
button when the fields are set correctly.
4.3.18 NTP
setup
Use the
NTP
(Network Time Protocol)
Setup
function to synchronize the real-time clock on the VP- 101
with the atomic clock. Before using this feature, make sure that the correct date, time and time zone have
been set up. Also make sure that the DNS IP number has been set up under the TCP/IP settings.
The following options are available in the submenu:
Enable -
enables the NTP function to synchronize the real-time clock.
Period (Hour) -
sets up the time interval after which the time is re-synchronized.
Server -
selects the NTP server from several pre-defined choices.
Edit NTP Server -
enables you to choose your own NTP server.
Test&Save? -
tests the server and saves the changes.
To change NTP settings:
1. Use
the
Up
and
Down
arrow buttons to select a field to change from the NTP menu.
