57
2. Press
the
Right
button to confirm.
3. Press
the
Key Pad
button on the remote control to display the on-screen keyboard.
4. Use
the
Arrow
buttons to select letters from the on-screen keyboard and use the OK button to
confirm.
5.
When the field is set correctly, press the
Key Pad
button on the remote control to turn off the
on-screen keyboard.
6. Press
the
OK
button to save changes.
4.3.19 License Setup
There are two ways to grant POS license. One is key-in license key; the other one is plug-in a key-pro. So
if you plug-in a key-pro you don’t need to key in the license number again in the license setup menu. Use
the
License
menu to key in the license number.
There are three POS License to three levels:
Level 1: Single POS unit – Can connect ONLY one cash register.
Single POS only one cash register. This level pos function doesn’t need to register.
Level 2. 4 POS units -- Can connect maximum 4 cash registers.
Level 3. Full functions – Can connect maximum 16 cash registers.
4.4 Record
setup
Use the
Record Setup
menu to set all the record options for the VP-404/4048. There are four
Record
Setup
submenus -
DVR
,
Record Schedule
,
Motion Detection
,
GPI Trigger
and
Pre-Alarm
. This
section covers each submenu in turn.
4.4.1 DVR
Setup
Use the
DVR
menu to set the DVR (Digital Video Recorder) mode. Choose
Cyclic Recording
to keep
recording on the hard disk continuously. Choose
Auto Stop
to stop recording when the disk is full.
