53
3. In
the
menu, use the
Up
and
Down
buttons to select a field from the following:
Addr -
Type the name of your mail server. See your network administrator for details about the address of
your mail server.
Name -
Type your user name.
Pass -
Type your password.
Sender -
Type the e-mail address of the sender.
Test -
Checks the validity of the provided E-mail address by sending E-mail.
5. Press
the
Right
arrow button to confirm your selection.
6. Press
the
Key Pad
button on the remote control to display the on-screen keyboard.
7. Use
the
Arrow
keys to select the letters you need to complete the field and press the
OK
button to
confirm.
8. When the field is complete, press the
Key Pad
button to turn off the on-screen keyboard.
9. Press
the
OK
button to save your changes.
Video Popup
Use the
Video Popup
menu to set up the time period for which the video from the selected camera is
displayed on your screen. The default screen is 20 seconds.
To set the video popup time:
1. Use
the
Up
and
Down
arrow buttons to select the
Video Popup
option from the Alarm menu.
2. Use
the
Left
arrow button to decrease the popup time and the
Right
arrow button to increase the
time
3. Press
the
OK
button to save your settings.
The Voice Call options enable you to set up a voice modem that will make a call when the selected event
(such as a GPI or motion alarm, or video lost from a camera) occurs.
You must install a voice/fax modem on one of VP-404/4048 COM ports, configure the COM port as a
voice Call/device, and make its protocol the same as that of the voice/fax modem for the voice call
function to work.
Voice call features:
A voice call message can be recorded using an internal or external microphone, and can be played
back using an internal or external speaker.
Up to 60 voice messages can be recorded and stored on the VP-404/4048 and used for different
alarm events.
Messages recorded for the voice call function must be between 5 and 10 seconds.
To set the Voice call function:
1. Use
the
Up
and
Down
arrow buttons to select the
Voice Call
option from the Alarm menu.
2. Use
the
Up
and
Down
arrow buttons to highlight the
Redial
option.
3. Use
the
Left
and
Right
arrow buttons to set the number of Redial attempts (0-9).
4. Use
the
Up
and
Down
arrow buttons to highlight the
Voice Repeat
option.
5. Use
the
Left
and
Right
arrow buttons to set the number of times the message is repeated (0-9)
6. Use
the
Up
and
Down
arrow buttons to highlight the
Time for Rec.
option.
