Vorwerk Kobold VR300, Руководство пользователя

Страница: 47 / 64

47
Maintenance
REINSTALLING THE ROLLER BRUSH AND BRUSH COVER:
• To reinstall the roller brush and the brush cover, follow the steps to remove
the roller brush in the reverse order.
• Ensure that the latch clicks into place when putting the brush cover back on
7 .
6.4 Cleaning the sensors
Warning! Risk of electric shock!
• Always switch the device off and disconnect the mains plug on the base
station before all retrofitting, cleaning and maintenance work.
Note! Risk of malfunction!
• Clean the sensors regularly (ideally each time the dust container is
cleaned).
• Clean the floor sensors 1 on the underside of the Kobold VR300 Robot Vacu-
um Cleaner with a cotton bud or a soft, clean cloth, but never with pointed or
sharp objects.
If the area of the sensors is very dirty, it can also be cleaned with a conven-
tional vacuum cleaner.
• Clean the wall following sensor 2 on the right-hand side with a cotton bud or
a soft, clean cloth.
• Clean the ultrasonic sensors 3 on the front of the robot vacuum cleaner with
a cotton bud or a soft, clean cloth, but never with pointed or sharp objects.
7
7
klick click klick click
Figure 6.8 Audible latching of the brush
cover
VR300
1
2
3
Figure 6.9 Cleaning the sensors