Vorwerk Kobold VR300, Руководство пользователя

Страница: 45 / 64

45
Maintenance
6.1.3 Reinstalling the dust container and filter
• Insert the filter back into the dust container 1 .
• Insert the dust container with filter
2
back into the Kobold VR300
Robot Vacuum Cleaner.
• Press down on the dust compartment cover
3
and ensure that it is properly
closed.
The dust compartment cover can be closed by simply pressing from the in-
side against the middle hinge
4 .
Note! Risk of damage from improper use!
• Never operate the Kobold VR300 Robot Vacuum Cleaner without the
filter.
6.2 Cleaning the side brush
Warning! Risk of electric shock!
• Always switch the device off and disconnect the mains plug on the base
station before all retrofitting, cleaning and maintenance work.
The side brush can simply be pulled away from the mounting point.
• Pull the side brush 1 up and off the drive axle by the green bristles 2 using
both hands.
• Remove any dust and dirt from the side brush.
• Remove any lint, hair or other dirt from the drive axle.
• For this, it may be necessary to remove the brush cover (see Chapter “6.3
Cleaning the roller brush” on page 46).
• To reattach the side brush, align the centre of the side brush with the mount-
ing point
1
and press it into position.
1
2
3
4
Figure 6.5 Reinstalling the dust container
and filter in the dust compart-
ment
1
2
Figure 6.6 Taking off the side brush