Vorwerk Kobold VR300, Руководство пользователя

Страница: 42 / 64

42 Wi-Fi and app control using smart devices*
5.6 Removing VR300 Robot Vacuum Cleaners from the
network
Remove your robot vacuum cleaner from the network if you wish to change your
Wi-Fi password, your name or your provider, or if you wish to hand over your ro-
bot vacuum cleaner to a third party.
• To remove the Robot Vacuum Cleaner from the network, push-hold the
bumper from the right side of the robot
2 (opposite side of the side brush)
and hold down the
start button
1 at the same time.
The bumper has been correctly pressed if you hear a click.
• Keep the bumper pushed and start button hold down until all the lights on the
Robot Vacuum Cleaner have gone out.
The WiFi settings are now reset.
To reactivate them, perform all the steps described in Chapter “5.4 Connect-
ing Kobold VR300 robot vacuum cleaners to smart devices” on page 41.
5.7 Controlling Kobold VR300 Robot Vacuum Cleaners
with Amazon Alexa
*
Kobold VR300 Robot Vacuum Cleaner can be controlled by speech with Amazon
Alexa, the voice assistant service of Amazon.
The availability of this service is limited in terms of countries and languages.
Please visit the Amazon web page in your country to find out more about Ama-
zon Alexa, the voice assistant service of Amazon and the possibility of con-
trolling your Kobold VR300 with this service.
* Availability may vary depending on the country
VR300
1
2
Figure 5.2 Removing robot vacuum
cleaners from the network