Vorwerk Kobold VR300, Руководство пользователя

Страница: 14 / 64

14
For your safety
• Clean the floor sensors regularly, as described in this manual (ideally each time the dust
container is cleaned). If the floor sensors are dirty, the Kobold VR300 Robot Vacuum
Cleaner may fall down stairs or landings. This can cause severe damage to the device.
• Remove light, loose objects (e.g. paper, items of clothing, thin rugs) from the work area.
Such objects may be pushed along in front of the robot vacuum cleaner, thereby obstruct-
ing its floor sensors. If the floor sensors are obstructed, the robot vacuum cleaner may fall
down stairs or landings. This can cause severe damage to the device.
• Keep the optionally available magnetic strip (not included) away from strong external mag-
netic fields. It may become damaged or demagnetised.
• The app control makes it possible to use the Kobold VR300 Robot Vacuum Cleaner even
when you are on the move. Ensure that you have prepared your home so as to prevent any
hazardous situations from arising.
• Use extreme care to avoid scratching the infrared window of the base station and do not
cover it with stickers or other objects.
• Extreme heat or cold shortens the charge time and/or can cause damage to the battery.
• Do not leave the device near a heat source (oven, heater or hot radiator).
• Do not use abrasive cleaning pads, chemical agents or aggressive liquids such as benzene
or acetone to clean the robot vacuum cleaner.
• Never clean the device with water or damp cleaning agents.
• Only operate the base station with the alternating current voltage and mains frequency
stated on the type plate.
• Use and charge the robot vacuum cleaner at temperatures between 5 °C and 35 °C. The de-
vice should also be stored within this temperature range.
• Do not attempt to remove the battery.