Vorwerk Kobold VR300, Руководство пользователя

Страница: 20 / 64

20 Getting started
2.3 Assembly
2.3.1 Removing the transparent protective films
• Remove the transparent protective films from the Kobold VR300 Robot Vacu-
um Cleaner and the base station.
2.3.2 Inserting the filter
Note! Risk of damage from improper use!
• Never operate the device without a filter.
• Press the button 1 that releases the cover on the dust compartment 2 and
open the dust compartment.
• Close the dust container with the help of the filter 3 . The green lug on the fil-
ter frame should be on the right-hand side pointing forwards.
• Insert the closed dust container with filter 4 into the robot vacuum cleaner.
• Press down on the dust compartment cover 2 and ensure that it is properly
closed.
The dust compartment cover can be closed by simply pressing from the in-
side against the middle hinge
5
.
2.3.3 Installing the side brush
• To reattach the side brush, align the centre of the side brush with the mount-
ing point
1
and press it into position.
5
4
2
3
3
2
2
11
VR300
1
Figure 2.2 Inserting the filter
Figure 2.3 Installing the side brush
1