Vorwerk Kobold VR300, Руководство пользователя

Страница: 44 / 64

44 Maintenance
The dust container can also be cleaned manually:
• Remove the dust container 5 from the dust compartment 6 . To do this, pull
the dust container out by the green tab 4 .
• Open the dust container by taking out the filter on its narrow side. This is
done by pulling the filter out of the dust container by the green lug
8 on the
filter frame 7 .
• Empty the contents of the dust container using a brush, or clean it out with a
conventional vacuum cleaner.
6.1.2 Cleaning the filter
The pleated filter material is covered by a pre-filter to protect it against severe
contamination and damage. However, fine dust and fibres may accumulate after
some time between the pre-filter and the pleated filter material. Therefore, we
recommend cleaning the filter regularly with a conventional vacuum cleaner.
• Remove the filter by pulling it out of the dust compartment by the green lug
8 on the filter frame.
• Vacuum both sides of the filter 9 and/or clean it with a soft, dry cloth.
The fibres remaining under the pre-filter do not impair the performance
of the filter as a whole. For optimum cleaning performance, we recom-
mend replacing the filter with a new one once a year.
4
5
6
Figure 6.2 Removing the dust container
7
8
Figure 6.3 Removing the filter
9
Figure 6.4 Cleaning the filter