⇒
fig. 216
(A)
(B)
(C)
(D)
(E)
Side marker
light
Low beam
High beam
Turn signal
and parking
light
Daytime
running lights
3.
Unscrew the
fastening screw
⇒
fig. 217
(arrow) with a
short
screwdriver. To
access the
screw, turn the
wheel in
question inward
as shown in .
Same as column
(A)
.
4.
Remove the
cover from the
wheel house
lining .
Same as column
(A)
.
5.
On the back of the headlight assembly, pull off the rubber cover for
the bulb you are replacing.
Turn plastic
cover
⇒
fig. 216
A
(E)
counterclockwise
and remove.
6.
Left side of the
vehicle: Turn
plastic bulb
socket
counterclockwise
(about 1/8 turn)
to release it.
Right side of the
vehicle: Turn
plastic bulb
socket
clockwise
(about 1/8 turn)
instead.
Turn plastic bulb
socket
counterclockwise
(about 1/8 turn)
to release it.
Press plastic
tab on back of
bulb socket to
release it.
Same as
column
(A)
.
Same as column
(A)
.
7.
Pull plastic bulb socket assembly back and out of the headlight assembly.
8.
Replace the burned out light bulb with a new bulb of the same type.
9.
Reinsert the bulb socket assembly into the headlight assembly.
