Turn signal lever and high beam switch
Fig. 95
Turn signal lever and high beam switch.
¤
Please first read and note the introductory information and heed the WARNINGS
.
Move the lever to the desired position.
(1)
Right turn signal.
(2)
Left turn signal.
(3)
Switching high beams on
⇒
An indicator light
comes on in the instrument cluster when
the high beams are switched on.
(4)
Switching the high beams off and operating the headlight flasher: The
headlight flasher
turns on
the high beams as long as the lever is pulled and manually held in the pulled position. The indi-
cator light
lights up. When released, the lever moves back to the home position and turns off
the high beams. The indicator light
goes out.
Move the lever back to the home position to turn the selected feature off.
Lane change signaling feature (convenience turn signal)
To use the lane change signaling feature, move the lever up or down slightly, just to the point of re-
sistance and then release it. If you have lane change flash (
Conv. turn sig.
) switched on, the turn
signals and the turn signal indicator flash 3 times. If it is switched off, they flash as long as you hold
the lever up or down, and go out when you release the lever.
Lane change flash is switched on and off in the
Lights & Vision
menu in the instrument cluster
display. If your vehicle is not equipped with the
Lights & Vision
menu, the feature can be deac-
tivated by an authorized Volkswagen dealer or authorized Volkswagen Service Facility.
WARNING
Improper use of high beams can distract and blind others, causing accidents and serious
injuries.
The turn signal light works only when the ignition is switched on. The emergency flasher works
even when the ignition is switched off.
The indicator light flashes twice as fast if a turn signal bulb is burned out.
High beams
can only be switched on when low beams are on.