The vehicle tool kit is in the luggage compartment in one of several places, such as under the luggage
compartment floor panel
⇒
fig. 203
.
x
Open the luggage compartment lid.
x
Grasp the floor panel by the handle and lift it up in the direction of the arrow ; remove it if
necessary.
Completely retract the jack after use. Otherwise it will not fit in its compartment and cannot be
stowed safely.
Contents
Fig. 204
Contents of the vehicle tool kit.
¤
Please first read and note the introductory information and heed the WARNINGS
.
The contents of the vehicle tool kit depend on the vehicle configuration. The following describes the
maximum contents.
Contents of the vehicle tool kit
⇒
fig. 204
(1)
Screwdriver with a hexagonal socket in the handle for removing or inserting previously
loosened wheel bolts. The screwdriver blade is reversible. The screwdriver may be stored
under the lug wrench.
(2)
Adapter for anti-theft wheel bolts (if applicable). Volkswagen recommends that you always carry
the adapter for the wheel bolts in the vehicle along with the vehicle tool kit. The
code number
of the wheel bolt lock is imprinted on the front of the adapter. If lost, a replacement adapter can
be ordered using this number. Record the code number of the wheel bolt lock and store it
separate from the vehicle.
(3)
Hubcap puller clips for removing hubcaps, wheel covers, or wheel bolt caps.
(4)
Jack. Before putting the jack back in the foam insert, be sure to completely crank the jack down
to its original position.
(5)
Lug wrench.
(6)
Crank.
A front towing eye (not shown) may also be included in the vehicle tool kit.
