Applicable only in Korea
Convenience
submenu
¤
Please first read and note the introductory information and heed the WARNINGS
.
Convenience
menu Function
ATA confirm
The horn beeps once when the vehicle is locked with the remote control
vehicle key if
ATA confirm
is checked.
Central locking
⇒
page 58
Auto lock
Auto lock
: You can enable or disable Auto lock. If Auto
lock is enabled (box checked), the vehicle doors automatical-
ly lock after reaching a speed of 15km/h.
Auto
unlock
Auto unlock
: You can enable or disable Auto unlock. If
Auto unlock is enabled (box checked), it is triggered on
vehicles without Keyless Access by taking the key out of the
ignition.
On Keyless Access vehicles, Auto unlock is triggered by
opening the driver door. Auto unlock works only if the vehicle
has been automatically locked after reaching a speed of
10 mph (15 km/h). It unlocks the doors that would be un-
locked if you pushed the unlock button on the remote control
vehicle key once.
Unlock
doors
Doors are unlocked as follows depending on the option
selected:
–
All doors
: Pushing the unlock button
0
on the remote
control vehicle key (
⇒
fig. 30
,
⇒
fig. 33
,
⇒
fig. 32
or
⇒
fig. 31
)
unlocks all doors and the luggage compartment.
–
Single door
: Pushing the unlock button
0
on the remote
control vehicle key unlocks only the driver door. To unlock all
doors and the luggage compartment, push the unlock button
0
on the key a second time within about 5 seconds.
–
Vehicle side
: Pushing the unlock button
0
on the re-
mote control vehicle key unlocks the doors on the driver side
of the vehicle. On vehicles with Keyless Access, touching the
sensor surface of a door handle on the side where the valid
vehicle key is located unlocks the doors on that side of the
vehicle.
Window op.
Power window settings: When unlocking / locking the vehicle from the driver
door with the fold-out key bit (mechanical key), all windows can be opened
or closed by holding the key in the open / close position.
Mirror down
Tilts passenger mirror down when backing up so you can see the curb.
Feature only available on vehicles equipped with memory seats.
Mirror adjust
The setting
Both mirrors
adjusts the passenger-side outside mirror as
well when the driver-side outside mirror is repositioned. This feature is not
factory enabled and must be activated in the
Convenience
submenu.
Factory setting
Resets certain features in the
Convenience
submenu to the factory set-
tings.
Back
The display switches back to the
Settings
menu.