¤
Please first read and note the introductory information and heed the WARNINGS
In the Basic version, the instrument cluster displays are controlled by the OK/RESET button and the
TRIP rocker switch on the windshield wiper lever (
⇒
fig. 14
,
(1)
and
(2)
).
Switch on the ignition. The instrument cluster display is divided into 3 parts. The time (digital clock) is
displayed in the top part. The bottom part contains the odometer and the trip odometer ("trip"). The
display in the middle part is selected by pushing the TRIP rocker switch (
(2)
) on the end of the wind-
shield wiper lever. The available displays are as follows:
The available displays are as follows:
Fuel range estimate
(estimated distance you can drive with the fuel remaining in the tank).
Trip memory 1 (single trip memory) and trip memory 2 (total trip memory)
▪
Push the OK/RESET button (
(1)
) on the windshield wiper arm to toggle between trip memories 1
and 2.
▪
Push and hold the OK/RESET button to reset a trip memory to zero.
▪
The function of the 2 trip memories is explained in
⇒
page 31,
MFI menu (Multi-Function Indicator):
Premium version
,
⇒
page 33,
MFI menu (Multi-Function Indicator): Premium version
. The 2 trip
memories are in addition to the trip odometer, which is displayed in the bottom part of the instru-
ment cluster and controlled using the 0.0/SET button on the right of the instrument panel
⇒
fig. 10
,
⇒
fig. 11
ø --- mph (ø --- km/h) shows the average speed on trips per trip memories 1 and 2.
▪
Push the OK/RESET button on the windshield wiper arm to toggle between the two average speed
figures.
¢
--- mph (
¡
--- km/h) or xx mph (xx km/h). Use this menu to set or disable the speed warning
feature.
▪
Push the OK/RESET button to toggle between --- mph (--- km/h) (speed warning disabled) and xx
mph (xx km/h).
▪
A warning chime will sound you if you reach the set speed; there may also be a visual message.
▪
The set speed will blink for a few seconds after you toggle to xx mph (xx km/h).
▪
Press the TRIP rocker switch (
(2)
)
while the set speed is blinking
to increase or decrease the
speed.
Outside temperature
Travel time since last reset of trip memories 1 and 2.
▪
Push the OK/RESET button to toggle between the two time figures.
--- mpg (l/100 km) current fuel consumption.
ø --- mpg (ø l/100 km) average fuel consumption of trips per trip memories 1 and 2.
▪
Push the OK/RESET button to toggle between the two figures.