Main menus
Function
See
Audio
Station indicator in radio mode
Track display in CD mode.
Track display in media mode.
⇒
Booklet
Radio
or
⇒
Booklet
Navigation
system
Navigation
Information displays on the navigation system:
When destination guidance is active, turn arrows and
proximity bars are shown. The illustration is similar to the
symbol display in the navigation system.
If destination guidance is inactive, driving direction (com-
pass function) and the current street name are displayed.
⇒
Booklet
Navigation
system
Phone
Information and settings of the mobile phone package.
⇒
Booklet
Mobile
Phone Package
Vehicle
status
Current warning and information messages.
This menu item is only displayed when warning or infor-
mation messages are available. The number of available
messages is shown in the display. Example: 1/1 or 2/2.
Settings
Includes the Convenience and Lights & Vision submenus,
as well as many settings such as time, speed warning for
winter tires, language, units and “Display OFF.”
Applicable only in the United States and Canada
MFI
menu (Multi-Function Indicator): Premium version
¤
Please first read and note the introductory information and heed the WARNINGS
.
The MFI menu has 2 automatic trip memories:
1 – single trip memory
and
2 – total trip memory
.
The number of the memory is shown at the upper right of the display. The trip memories are in addi-
tion to the trip odometer, which is displayed in the bottom part of the instrument cluster and controlled
using the 0.0/SET button on the right of the instrument panel
⇒
fig. 10
(7)
,
⇒
fig. 11
(7)
.
To display the distance driven on trips 1 and 2, select the
Route
item in the MFI menu (
MFI
>
Route
). Press the OK button (
⇒
fig. 15
) to toggle between Route 1 and Route 2 (trip 1 and trip 2).
Push and hold the OK button to manually reset a trip memory to zero.
1
Single trip
memory
The memory accumulates and stores information about distance driven and
fuel used from the time the ignition was switched on until the time it was
switched off.
If the ignition stays off for 2 hours or more, stored information is automatical-
ly deleted. If the trip is continued within 2 hours after the ignition was
switched off, the new values are added.
2
Total trip memory
The memory displays and stores the accumulated driving and fuel consump-
tion data of any number of single trips up to a total driving time of 99 hours
and 59 minutes, and up to a total distance of 9,999 miles (9,999 km), de-
pending on the instrument cluster version. If one of the maximum values is
exceeded, then the memory is automatically cleared and starts again from 0.
Possible MFI menu displays
The following displays can be accessed in the MFI menu if enabled under
Settings
>
MFI data
.
Displays that are not enabled will not appear.