Switches in the driver door
Key to
fig. 45
:
(1)
For the windows in the front doors.
(2)
For the windows in the rear doors.
(3)
Safety switch.
Opening or closing windows
Function
Action
Opening:
Press the
switch.
Closing:
Pull the
switch.
Stopping automatic
movement:
Press/pull the switch again.
_
The safety switch
(3)
deactivates the power windows
in the rear doors. The yellow indicator light in the
switch comes on.
You can still use the power windows for several minutes after the ignition is switched off as long as the
driver or front passenger door has not been opened. When the vehicle key has been removed from
the ignition and the driver door has been opened, the power windows cannot be opened or closed.
Power windows – features
¤
Please first read and note the introductory information and heed the WARNINGS
.
One-touch opening and closing
The one-touch feature automatically opens/closes a power window all the way. The window switch
does not have to be held down/up.
For one-touch opening:
Press the switch for the window down briefly as far as it goes.
For one-touch closing:
Pull the switch for the window up briefly as far as it goes.
Stopping automatic movement:
Pull/press the switch again.
Reactivating the one-touch feature
If the vehicle battery is disconnected or dead and the windows are not completely closed, the one-
touch feature will not work and must be reactivated:
x
Close all windows and doors.
x
Pull up the switch for the respective window and hold it for at least 2 seconds in this position.
x
Release the switch, pull up and hold again. The one-touch feature is now reactivated.
The one-touch feature can be reactivated for one or more windows at the same time.
Convenience closing
The convenience closing feature lets you close the windows and the power sunroof as follows:
x
From inside the vehicle, pull up and hold the switch for the driver window until all windows and the
sunroof are closed.
Convenience closing first closes the windows and then the power sunroof.