It is important to know where the fire extinguisher is stored, how to remove and how to use it
before
you need it to put out a fire.
Please be sure to read the operating instructions and heed the other important information on the fire
extinguisher label before you have to use it in a later emergency.
Using the fire extinguisher
x
Release the retaining tab on the fire extinguisher bracket upward, in the direction of the arrow
⇒
fig. 192
.
x
Remove the fire extinguisher from the bracket.
x
Lift the lever on the fire extinguisher in the direction of the arrow
(A)
to break the seal on the
extinguisher canister.
x
While holding the fire extinguisher upright, direct the nozzle at the source of the fire.
x
Press the release in the direction of the arrow
(B)
to release the extinguishing agent.
x
Extinguish the fire from the bottom up.
x
Stop extinguishing the fire only when the flames are quenched.
x
If possible, have another fire extinguisher or other extinguishing agent available in case the fire
reignites!
Installing the fire extinguisher
x
Guide the fire extinguisher into the attachment straps.
x
Place the fire extinguisher on the bracket.
x
When locking the attachment strap, always make sure that the locking bars engage securely.
Fire extinguisher maintenance
Check the following on the fire extinguisher regularly:
x
Expiration date: do not exceed the expiration date on the fire extinguisher.
x
Pressure gauge: the needle
⇒
fig. 193
must be in the green area (ready for use).
x
General inspection: make sure the components are secure and check for rust, dents or other
damage.
x
Intact tamper-resistant seal: shows that the fire extinguisher has not been used.
WARNING
A loose fire extinguisher in the passenger can be thrown around the passenger compartment
and cause serious personal injury during hard braking, an emergency maneuver or during a
crash
x
Always make sure that the fire extinguisher is properly and firmly secured in bracket
provided.
