Volcano CORE Mobile, Руководство оператора

Страница: 59 / 148

300004969171/B Page 59 of 148
Play and Stop
Controls to play and stop the video loop are located on the control console and in the
lower right hand section of the screen under the ILD.
Figure 27: Review Toolbar, Play
When the video loop is playing, a white frame marker moves downward to represent
movement through the frames captured when the loop was recorded. The tomographic
image changes to correspond to the location of the frame marker in sagittal view. When
the frame marker reaches the end of the video loop, it starts at the first frame and
continues until the user stops playback. Use the scroll bar to scroll through the image.
The
Stop
key on the control console or the red button at the bottom of the ILD pauses
video loop playback. The
Play
key or green button resumes playback.
Rapid Review Feature
The Rapid Review feature allows you to quickly view a select number of frames
proximal and distal to a frame of interest. This feature is used to help identify image
elements using nearby frames. The number of frames to be reviewed can be set in the
Settings window.
To activate Rapid Review, press the Rapid Review button located between the Play and
Stop buttons as shown below. To deactivate Rapid Review, press the same button. The
button is green when Rapid Review is not active, and red when is active.
Measurements can be made while in Rapid Review. To make a measurement, simply
press the rapid review button and select a measurement option from the submenu
underneath the image. To edit a border, click on the border to enter edit mode. The
measurement toolbar and editing feature is explained in more detail in Chapter 8.
Figure 28: Review Toolbar, Rapid Review