Volcano CORE Mobile Скачать руководство пользователя

Страница: 51 / 148

300004969171/B

Page 51 of 148

Adaptive NearVu adaptively corrects for acoustic interference in the image region

around the IVUS catheter. It is the default setting for all Eagle Eye Catheters.

NOTE:

The operator should ensure there is no tissue or artifact present from guide

catheter in the ringdown area before turning on NearVu. Otherwise, a persistent image

artifact can remain in the ringdown area.

To perform Adaptive NearVu:

Press

Ringdown

key on the control panel or in the Adjust Image screen.

Adaptive NearVu is activated and ringdown artifacts are subtracted from

tomographic images.

Press the

Ringdown

key again to stop the ringdown reduction (if desired).

NOTE:

The NearVu option in the Settings dialog box must be checked.

Manual Ringdown Reduction - Manual NearVu

Manual NearVu collects a new, but single, acoustic reference and removes it from

tomographic images. This is the only ringdown reduction method available for the PV

.018 and PV .35 catheters, and is an optional method for use with Eagle Eye catheters.
To enable Manual NearVu on Eagle Eye catheters, select

Manual

in the Settings dialog

box. Press the

Ringdown

key on the control panel to start the ringdown reduction; press

the

Ringdown

key again to stop the manual ingdown reduction.

NOTE:

Whenever a new catheter is used, or when a catheter is disconnected and

reconnected, it is recommended to perform ringdown reduction (automatic NearVu or

Manual NearVu).

To perform Manual NearVu:

Position the catheter coaxially (centrally) in either the aorta or the ostium of the

left or right coronary artery, or other large open arterial or venous location, if using

the PV catheters..

Press the

Ringdown

key on the Control Console.

This activates a manual ringdown using a system-derived (fixed) ring down area.

Ringdown artifacts are subtracted from tomographic images.

Press the

Ringdown

key again to stop Ring Down.

Revolve Tomographic View

Use the revolve feature to rotate the tomographic image to the left or right to determine if

there is an arterial branch. This feature is not available with the Eagle Eye Gold, Eagle

Eye Platinum and Pioneer Plus catheters. To rotate the image in a clockwise direction:

Using the track ball, move the cursor over the top box with the red and blue

rotational arrows and press Select.

Press the

)

key repeatedly to rotate the image in 5 degree increments.

Содержание CORE Mobile





















































































































































Результаты поиска

Содержание CORE Mobile

Отзывы:

Похожие инструкции для CORE Mobile

Бренды по названию

Популярные бренды

Volcano CORE Mobile, Руководство оператора

Результаты поиска

Содержание CORE Mobile

Отзывы:

Похожие инструкции для CORE Mobile

Бренды по названию

Популярные бренды