Volcano CORE Mobile, Руководство оператора

Страница: 131 / 148

300004969171/B Page 131 of 148
Harmonic emissions
IEC 61000-3-2
Not applicable
Not applicable
Voltage fluctuations/
flicker emissions
IEC 61000-3-3 Not applicable
Not applicable
Guidance and Manufacturer’s declaration – electromagnetic immunity Volcano System
Series
The Volcano System Series is intended for use in the electromagnetic environment specified
below. The customer or the user of the Volcano System Series should assure that it is used in such
an environment.
During immunity testing the Volcano system was exercised by placing the system in a simulated
imaging mode with normal operation indicated by an active image portrayed on the display.
During and after immunity testing the system shall continue to function and accept the commands
given by user. It can temporarily lose communication but must return to normal operation without
being disconnected.
Immunity Test
IEC Test Level Compliance Level Electromagnetic
environment-guidance
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
3 Vrms
150 kHz to 80
MHz
3 V/m
80 MHz to 2.5
GHz
3 Vrms
c
3 V/m
c
WARNING Portable RF
communications equipment
(including peripherals such
as antenna cables and
external antennas) should
be used no closer than 30
cm (12 inches) to any part
of the CORE Mobile
system, including cables
specified by the
manufacturer. Otherwise,
degradation of the
performance of this
equipment could result.
Interference may occur in
the vicinity of equipment
marked with the
following symbol:
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.