Volcano CORE Mobile, Руководство оператора

Страница: 34 / 148

Page 34 of 148 300004969171/B
NOTE : The Volcano system software displays numeric data in a format appropriate for
the chosen display language. For example, in English “12.01 mm” in German “12,01
mm”, in French “12,01 mm” etc. (FFR mode additionally displays Regional Settings.)

Adjust the date and time. Click the radio button below the Date Format field to
select a date format, either M/D/Y, D.M.Y, or Y-M-D. Check Use 24-Hour
Format to set the date using a 24-hour system.

Select the default boot-up mode: IVUS or FFR

Choose to enable (display) all information boxes in which Do not display again
was selected.
Click OK to save your selections or click Cancel to disregard selections.
Figure 12: Settings - System Defaults
Image Tab
The Image tab allows you to do the following:

Select Ringdown Mode: NearVu or Manual

Check to show (uncheck to hide) measurement graticules on x and y axis

Select the playback loop size (total number of frames) and loop playback speed
(frames/sec) for the Rapid Review feature.