Vogt VH 25 Скачать руководство пользователя

Страница: 12 / 56

General safety instructions

Subject to change without notice

VH / VTS / VBL / VAI Translation of the original operating manual

US edition 2021/01

Contact:

+49(0)92 78-774 33-0

+49(0)92 78-774 33-11

www.vogt-tec.com

3 General safety instructions

3�1 Basic principles

Only use the device in a technically flawless condition.

In the event of faults, malfunctions, or changes in the operating behavior

of the compressed air device, switch it off immediately and arrange for the

fault to be fixed.

3�2 Intended use

VOGT Hammer /

TurboSpade

VOGT Hammers / TurboSpades are hand-held devices (machinery) for

performing mechanical tasks such as compacting, ramming, scraping, cut-

ting, breaking up, removing, solidifying, uncovering, cleaning, digging, and

loosening materials or aeration. They must be used together with original

VOGT tools and accessories.

The basic sets specified for each task contain the appropriate tools, acces-

sories, and protective equipment for different applications such as civil

engineering, road construction, outdoor or indoor work, and renovating

walls, floors, and roofs.

To minimize the risk to health due to the impact of vibrations from the

pneumatic actuator, a limit must be imposed on how long the user is per-

mitted to be exposed to vibrations.

VOGT Soil Aerator

For loosening deep-lying, compacted materials

VOGT Air Injector

For loosening deep-lying, compacted materials

3�3 Foreseeable misuse

Use in explosive or potentially explosive atmospheres.

Use under water.

Содержание VH 25

























































Результаты поиска

Содержание VH 25

Отзывы:

Похожие инструкции для VH 25

Бренды по названию

Популярные бренды

Vogt VH 25, Перевод оригинального руководства по эксплуатации

Результаты поиска

Содержание VH 25

Отзывы:

Похожие инструкции для VH 25

Бренды по названию

Популярные бренды