Vocera Smartphone, Руководство пользователя

Страница: 65 / 150

Calling a Group Member
Basic Calling ··· 65
Calling a Group Member
The system administrator may create groups of Vocera users and provide a
list of groups for you to use in commands. When you call a group, you are
actually calling an available member of that group, not everyone in the group.
The Vocera server determines which member to try first, based on the ordering
method the system administrator or group manager chooses.
Action Recommended Voice
Commands Alternative Forms
Call a group member Call Tech Support. Find Tech Support.
Get me Tech Support.
Contact Tech Support.
To call a member of a group
1. Press the Call button.
2. Wait for the Genie to answer.
3. Tell the Genie to "Call the Group's name."
The Vocera server searches for an available member of the group. If no
one in the group is available, you will either be prompted to leave a
message (which will be sent to all members of the group) or your call will
be forwarded, depending on the way the system administrator or group
manager has set up the group.
Training the Genie
If the Genie has difficulty understanding your speech, don't get frustrated—
you can train the Genie to recognize the way you say names and commands.
The Genie can learn the names of people, groups, and locations as well as most
commands. You can also train the Genie to recognize a nickname, if that is the
way you always call a person you know.
When you train the Genie to learn a name, you are prompted to spell the
name. If you change your mind, you can use the "Unlearn a name" command
to delete it. The Genie will prompt you for the necessary information.
The following table lists all the commands you can use to train the Genie: