S
ecti
on 4
- B
re
we
r S
yst
em
Eccellenza Touch
VKI Publication #100309-001
23
Removing the Brewer Piston & Seal
1.
Remove the filter screen
(
see page 22
)
.
2.
Remove the brewer from the machine, and remove the wiper from the brewer.
3.
Remove the screw securing the piston to the piston rod, and then remove the piston.
4.
Using a small flat head screwdriver, carefully pry the seal from the piston to remove it.
Avoid damage to the piston as it will then need to be replaced as well
.
5.
Install the new seal onto the piston.
To avoid installing the seal upside down onto the
piston, note the orientation of both
(see image below)
.
Prior to reassembling the
brewer, make absolutely
certain that the seal is
completely inserted into its
seat all the way around the
piston.
