S
ecti
on 5
- Cof
fee
&
P
ow
der
S
ys
tems
Eccellenza Touch
VKI Publication #100309-001
41
7.
Push down on the locking clip at the front of the base, and pull the base and motor out
through the front of the support.
8.
Disconnect the inline wiring connector that supplies power to the whipper motor.
Cleaning the whipper components
At this point, all of the
plastic
components have been removed. They can now be
cleaned with warm water and dish soap. Thoroughly rinse the components under warm
running water for several minutes to remove any remaining residues. Once done, the
components must then be dried using a clean cloth.
Do not submerge the whipper motor in water.
Do not rinse the whipper motor with water.
Do not use any type of cleaner or detergent on the whipper motor.
Prior to reassembling the whipper system, we recommend that you inspect and, if
required, replace the whipper seal and the large whipper base o-ring.
