Vivreau V3-205, Руководство пользователя, Страница: 23 / 28

V3-205 Dispensing System Owner’s Manual
23
Section 7
Troubleshooting
TROUBLESHOOTING
The information provided in this section is
intended to assist in the identification and
correction of any irregularities and malfunctions
which might occur during operation.
IMPORTANT _________________________
Maintenance and repairs must only be carried
out by properly qualified and trained personnel.
Always switch OFF and unplug the equipment
before performing any service or repair
procedures.
BASIC TROUBLESHOOTING
NO STILL WATER
Make sure the Water Supply Valve is open.
NO SPARKLING WATER
If only gas is coming out, check the Water Supply
Valve or power. If nothing is coming out, check
CO
2
tank and change if needed.
LED DISPLAY
LED Display Panel Location and Lights
POWER: Make sure unit is plugged in.
CHANGE CO
2
: Change CO
2
Cylinder.
CALL SERVICE: Unplug unit and check still water.
If still water is not working, check Water Block
and Water Supply Valve. Plug in unit. If Service
Light returns, please contact Vivreau Service Toll-
Free at 877-999-1044.
EMPTY DRIP TRAY (Not Activated on this unit):
Empty the Drip Tray Container.
WARM WATER (STILL AND SPARKLING)
Make sure unit is plugged in and operating.
Make sure the Condenser Grille is not clogged
or blocked.
IMPORTANT _________________________
If these troubleshooting procedures do not
resolve the issue, please contact Vivreau Service
Toll-Free at 877-999-1044.